Distillation Apparatus (Gas)

• Shore A, 0 and D to measure the hardness of plastics through penetration measurement
• Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
• Shore 0 foam, sponge
• Shore D plastics, formica, epoxides, plexiglass etc.
• Material thickness of the sample: min. 4 mmDelivered in a hard carrying case
• Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 7619-1 are often not possible because of very narrow standard tolerances
• Can be attached to the test stands TI-ACL (for Shore A and A0), TI-DL (for Shore D) to improve measuring uncertainty
• Large display with backlight
• Selectable: AUTO-OFF function or permanent operation, battery level indicator

• Type:  Chest Freezer
• Total Gross capacity Liter:  545
• Freezer Gross Capacity Liter.:  545
• Dimension(W*D*H):  1654*745*905
• Gross Capacity (Cubic Ft.):  19.26
• Temp Freezer:  Min -28
• Net Weight (Kg):  76 kg
• Gross Weight (Kg):  86 kg
• Voltage Range:  105V – 260V
• Refrigerant:  R600a
• Food Basket:  2
• Super Freeze Function:  Yes
• LED Lights:  2
• Power On Indicator:  Yes
• Climate Class:  T
• Copper Evaporator:  5 sides

Head
Trinocular, 30° inclined, 360°rotating
Eyepiece
WF 10x/20
Nosepiece
Quintuple, reversed
Objectives
IOS N-PLAN 4x, 10x, 20x, 40x, 100x (oil/water)
Stage
Double layer, 233×147 mm, moving range 78×54 mm, X-axis rackless
Focusing
Coaxial coarse and fine, limit stop
Condenser
Abbe N.A. 1.25, iris diaphragm, focusable and centrable
Illuminator
Transmitted: 3.6 W X-LED³, manual brightness control
Incident: High-power blue LED